Présentation du produit

1. The instrument is suitable for storage and use in an environment with an ambient temperature of -20℃~70℃ and a humidity of less than 80%.

2. When connecting the instrument to the power supply, refer to 5.2 for electrical connection. Only after confirming that the operation is correct can the power supply be turned on for operation.

3. When disassembling the instrument, do not apply force to the instrument housing.

Caractéristiques du produit

1. Standardized installation: 120mm standard instrument installation

2. Case structure design: The new case structure design can be applied to various working conditions without adding components.

3. Optional power supply: The power supply can be selected from 24VDC 
220VAC

4. Various connection methods: Various process connection methods such as flanges, clamps, and threads can be provided, which are suitable for most factory application requirements.

5. Optional materials for measuring part: stainless steel, titanium, Hastelloy, PTFE, FEP and other materials.

6. Intelligent display: 4-digit LED digital tube display, ignore value

Paramètres techniques

Dimensions

Installation connection

Mechanical connection:

It can be directly installed on the hydraulic pipeline through the pressure pipe joint (M20*1.5) (other size joints can be specified when ordering). In critical applications (such as severe vibration or impact), the pressure pipe joint can be mechanically decoupled through a micro hose. The liquid level product is fixed according to the flange.

Note:Vertical installation when the range is less than100KPa.

Electrical connection:

In order to prevent the influence of electromagnetic interference, the following matters should be noted:

●The line connection should be as short as possible, and shielded wire should be used

●Try to avoid direct access to user devices or wiring of electrical and electronic devices that may cause interference

●If installed with a micro hose, the housing should be grounded separately