• Noticias de empresa

¿Cuáles son los puntos clave para seleccionar un caudalímetro de rotor?

When choosing a rotor flowmeter, you need to consider these aspects.

1: You need to understand the object that the rotor flowmeter measures. The main object is the medium, etc., such as: gas, liquid, etc.

2: Next, you need to look at the basic performance of the flowmeter itself. Under normal circumstances, its price does not change much, and you can directly measure its depth. And the structure and so on are very simple.

3: Generally speaking, the higher the accuracy, the higher its price. You need to choose according to the instrument. The others are secondary.

4: Then when the fluid flows in, we need to maintain the pipeline well. Prevent the flow value from exceeding.

The rotor flowmeter is mainly widely used in chemical industry, petroleum, etc. And its structure is very simple. The operation is very convenient, the price is relatively low, etc. Therefore, it is very popular. Especially for small and medium-sized enterprises, etc. And the rotor flowmeter is their main product for measuring flow.

Therefore, there are several requirements for the use and maintenance of the rotor flowmeter

1: First, check whether it is complete, and then remove the fixings. Whether it can slide freely.

2: When installing the pipeline, you need to see if it is in a line.

3: If you avoid the misunderstanding, you can use it. But when using it, you need to read the instructions. Then move slowly, etc.

4: Use it safely. Don't pull it casually.

Of course, when choosing a rotor flowmeter, in fact, it must be based on a comprehensive comparison of three stores. How to say this is very important. If you don't pay attention during the selection process, it is possible that the performance of the product you buy is not better, or you spend more money but don't really buy the product you need. It can be said that this is also very bad.

The above is a brief introduction on how to choose a rotor flowmeter. I hope it can be helpful to everyone in the industry. This information comes from Beite Instruments.